 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 30TPS16PBF High Voltage Series Vishay High Power Products Phase Control SCR, 20 A DESCRIPTION/FEATURES 2 (A) TO-247AC 1 (K) (G) 3 The 30TPS16PBF High Voltage Series of silicon Pb-free controlled rectifiers are specifically designed for Available medium power switching and phase control RoHS* applications. The glass passivation technology COMPLIANT used has reliable operation up to 125 C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with Vishay HPP input diodes, switches and output rectifiers which are available in identical package outlines. This product has been designed and qualified for industrial level and lead (Pb)-free ("PbF" suffix). PRODUCT SUMMARY VT at 20 A ITSM VRRM < 1.3 V 300 A 1600 V MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) IRMS VRRM/VDRM ITSM VT dV/dt dI/dt TJ 20 A, TJ = 25 C TEST CONDITIONS Sinusoidal waveform VALUES 20 A 30 1600 300 1.3 500 150 - 40 to 125 V A V V/s A/s C UNITS VOLTAGE RATINGS PART NUMBER VRRM/VDRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V 1600 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 1700 IRRM/IDRM AT 125 C mA 10 30TPS16PBF * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94387 Revision: 06-Jun-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 30TPS16PBF High Voltage Series Vishay High Power Products Phase Control SCR, 20 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average on-state current Maximum RMS on-state current Maximum peak, one-cycle, non-repetitive surge current Maximum I2t for fusing Maximum I2t for fusing Maximum on-state voltage drop On-state slope resistance Threshold voltage Maximum reverse and direct leakage current Maximum holding current Maximum latching current Maximum rate of rise of off-state voltage Maximum rate of rise of turned-on current SYMBOL IT(AV) IRMS ITSM I2 t I2t VTM rt VT(TO) IRM/IDM IH IL dV/dt dI/dt 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied t = 0.1 to 10 ms, no voltage reapplied 20 A, TJ = 25 C TJ = 125 C TJ = 25 C TJ = 125 C VR = Rated VRRM/VDRM TEST CONDITIONS TC = 95 C, 180 conduction half sine wave VALUES 20 30 250 300 310 442 4420 1.3 12 1.0 0.5 10 100 200 500 150 V/s A/s mA A2s A2s V m V A UNITS Anode supply = 6 V, resistive load, initial IT = 1 A Anode supply = 6 V, resistive load TRIGGERING PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak negative gate voltage SYMBOL PGM PG(AV) + IGM - VGM Anode supply = 6 V, resistive load, TJ = - 10 C Maximum required DC gate current to trigger IGT Anode supply = 6 V, resistive load, TJ = 25 C Anode supply = 6 V, resistive load, TJ = 125 C Anode supply = 6 V, resistive load, TJ = - 10 C Maximum required DC gate voltage to trigger Maximum DC gate voltage not to trigger Maximum DC gate current not to trigger VGT Anode supply = 6 V, resistive load, TJ = 25 C Anode supply = 6 V, resistive load, TJ = 125 C VGD IGD TJ = 125 C, VDRM = Rated value TEST CONDITIONS VALUES 8.0 2.0 1.5 10 60 45 20 2.5 2.0 1.0 0.25 2.0 mA V mA UNITS W A V SWITCHING PARAMETER Typical turn-on time Typical reverse recovery time Typical turn-off time SYMBOL tgt trr tq TJ = 25 C TJ = 125 C TEST CONDITIONS VALUES 0.9 4 110 s UNITS www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94387 Revision: 06-Jun-08 30TPS16PBF High Voltage Series Phase Control SCR, 20 A Vishay High Power Products THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, junction to ambient Maximum thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-247AC (JEDEC) SYMBOL TJ, TStg RthJC RthJA RthCS Mounting surface, smooth and greased DC operation TEST CONDITIONS VALUES - 40 to 125 0.8 40 0.2 6 0.21 6 (5) 12 (10) g oz. kgf * cm (lbf * in) C/W UNITS C Mounting torque Marking device 30TPS16 Document Number: 94387 Revision: 06-Jun-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 30TPS16PBF High Voltage Series Vishay High Power Products Phase Control SCR, 20 A Maximum Allowable Cas T e emperature (C) 30T .. S PS eries R thJC (DC) = 0.8 C/ W Maximum Average On-state Power Loss (W) 130 80 DC 180 120 90 60 30 120 Conduction Angle 60 110 30 100 60 90 120 180 MS 40 R Limit Conduction Period 20 30T .. S PS eries TJ = 125C 0 0 10 20 30 40 50 Average On-state Current (A) 90 0 5 10 15 20 25 Average On-state Current (A) Fig. 1 - Current Rating Characteristics Fig. 4 - On-State Power Loss Characteristics Maximum Allow able Case Temperature (C) 30T .. S PS eries RthJC (DC) = 0.8 C/ W Peak Half S Wave On-state Current (A) ine 130 280 260 120 At Any Rated Load Condition And With Rated V RRM Applied Following S urge. Initial T = 125C J @60 Hz 0.0083 s 240 @50 Hz 0.0100 s 220 200 180 160 140 120 1 10 100 Numb er Of Equa l Amplitude Half Cyc le Current Pulses (N) 110 Conduction Period 100 30 90 60 90 120 0 5 10 15 180 DC 25 30 35 30T .. S PS eries 80 20 Average On-state Current (A) Fig. 2 - Current Rating Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average On-state Power Loss (W) Peak Half S ine Wave On-s tate Current (A) 60 50 40 30 20 10 0 0 5 10 15 20 25 30 Average On-state Current (A) 180 120 90 60 30 R Limit MS 300 280 260 240 220 200 180 160 140 120 0.01 30T .. S PS eries 0.1 Pulse T rain Duration (s) 1 Maximum Non Repetitive S urge Current Versus Pulse T in Duration. Control ra Of Conduc tion May Not Be Maintained. Initial TJ= 125C No Voltage R eap plied R ated VRRMR eapplied Conduction Angle 30T .. S PS eries TJ= 125C Fig. 3 - On-State Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94387 Revision: 06-Jun-08 30TPS16PBF High Voltage Series Phase Control SCR, 20 A Vishay High Power Products 1000 Instantaneous On-state Current (A) TJ= 25C TJ= 125C 100 10 30T .. S PS eries 1 0 1 2 3 4 5 6 7 Instantaneous On-state Voltage (V) Fig. 7 - On-State Voltage Drop Characteristics T rans ient T hermal Impedance Z thJC (C/ W) 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 S teady S tate Value (DC Operation) S ingle Pulse 30T .. S PS eries 0.01 0.0001 0.001 0.01 S quare Wave Pulse Duration (s) 0.1 1 Fig. 8 - Thermal Impedance ZthJC Characteristics 100 Instantaneous Gate Voltage (V) Rec tangular gate pulse a)Rec ommended load line for rated di/ dt: 10 V, 20 ohms tr = 0.5 s, tp >= 6 s b)Recommended load line for <= 30% rated di/ dt: 10 V, 65 ohms 10 tr = 1 s, tp >= 6 s (1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a) (b) T = -10 C J T = 25 C J T = 125 C J 1 VGD IGD 0.1 0.001 0.01 (4) (3) (2) (1) 30T .. S PS eries 0.1 1 Frequenc y Limited by PG(AV) 10 100 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics Document Number: 94387 Revision: 06-Jun-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 30TPS16PBF High Voltage Series Vishay High Power Products Phase Control SCR, 20 A ORDERING INFORMATION TABLE Device code 30 1 1 2 3 4 5 6 T 2 - P 3 S 4 16 5 PbF 6 Current rating (30 = 30 A) Circuit configuration: T = Thyristor Package: P = TO-247 Type of silicon: S = Standard recovery rectifier Voltage rating (16 = 1600 V) None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95223 http://www.vishay.com/doc?95226 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 94387 Revision: 06-Jun-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of 30TPS16PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |